<<新主題 | 舊主題>>
娛樂滿紛 26FUN » 電腦區 » 新手一問: 買個部定整機?
返回列表 回復 發帖

新手一問: 買個部定整機?

部機壞鬼左.....諗緊整定買個部....

原本我部機係P4 1.7 GB, 512 MB RAM....但係懷疑底版打了柴.....唔知換底版+整要幾銀呢? 仲有有冇相熟鋪頭介紹?

OR 我諗住一了百了, 換埋部機.....budget大約五六千蚊度......心水呢兩部....

1. IBM -> http://www.pccwshop.com/onlinesh ... 945011&pg=&

2. HP -> http://h50025.www5.hp.com/hpcom/hc_hc/14_31_67_2960_PW663AA.html


唔知咁多位高手覺得我應該整定係買個部呢?
Originally posted by 123123_2005 at 2005-6-14 11:39 PM:
部機壞鬼左.....諗緊整定買個部....
...
Buy another one....ibm has the best customer service.....

I am not a fan of HP...I still think Compaq's quality is low.....HP is better with printers.

don't waste your time fixing the old one....

你果部係廠機定係自己砌咖 @_@?

如果係自己砌既..就睇係依家部野夠唔夠用囉

如果夠用既...就買番塊板啦...唔洗咁貴呀嗎

最後講下換機喇....

你問下身邊有冇朋友識砌電腦....如果去黃金買料自己砌都唔洗6000 一.一"
thx.....

皆因部機係人地幫我砌, 我都唔知點去換塊底版......我又唔識番好d config.....所以係都係搵人整......

唔知整機又有邊間好介紹呢??
Originally posted by 123123_2005 at 2005-6-15 10:35 PM:
thx.....

皆因部機係人地幫我砌, 我都唔知點去換塊底版......我又唔識番好d config.....所以係都係搵人整......

唔知整機又有邊間好介紹呢??
Give it a try at ViewCom in ShamShuiPo, they have a service and wholesale department just across Golden. Pretty good service <---- that's what my dad said, but I have never been there. (ViewCom is a very big company). I usually do everything by myself, that includes diagnosing faults.
返回列表 回復 發帖
<<新主題 | 舊主題>>
娛樂滿紛 26FUN » 電腦區 » 新手一問: 買個部定整機?

重要聲明:26fun.com為一個討論區服務網站。本網站是以即時上載留言的方式運作,26fun.com對所有留言的真實性、完整性及立場等,不負任何法律責任。而一切留言之言論只代表留言者個人意見,並非本網站之立場,用戶不應信賴內容,並應自行判斷內容之真實性。於有關情形下,用戶應尋求專業意見(如涉及醫療、法律或投資等問題)。 由於本討論區受到「即時上載留言」運作方式所規限,故不能完全監察所有留言,若讀者發現有留言出現問題,請聯絡我們。26fun.com有權刪除任何留言及拒絕任何人士上載留言,同時亦有不刪除留言的權利。切勿撰寫粗言穢語、誹謗、渲染色情暴力或人身攻擊的言論,敬請自律。本網站保留一切法律權利。